GYK-92S control performance characteristics:
● Human-machine interface, through digital display function, can realize information exchange between humans and machine equipment;
● Can display the operating status of the door;
● Can display equipment fault codes to facilitate maintenance;
● It has over-limit protection function to prevent the door from overshooting;
● It has door-in-door interlocking protection function;
● With infrared and airbag protection function interface;
● Can be connected to ground magnets and access control systems to achieve unmanned management and automatically open and close doors;
● It has the functions of inching and linkage switching of door opening and closing.
● With single-key cycle control function;
● It can cooperate with the encoder to set the stroke limit of the door opener directly on the control panel.
Medium-sized industrial door machine performance parameter table
Model | GYM200S-1 | GYM200S-2 |
Input voltage | AC380V | AC380V |
Rated power | 800W | 800W |
Rated current | 2.5A | 2.5A |
Startup torque | 200N.m | 200N.m |
No-load running time | 25min | 25min |
Maximum door weight | 60㎡ | 60㎡ |
Thermal protective temperature | 120℃ | |
Reducer | Copper worm gear and worm reduction mechanism | |
No-load rotating speed | 22r/min | |
Lubrication | Oil immersed | |
Noise | ≤55bB | |
Mode of manual chain | 360° universal chain type | |
Swift release upon powwer failure | The output shaft rotates 20 times | |
Limit switch type | Worm gear precise fine adjustment | 14-bit absolute encoder electronic limit |
Output shaft bore diameter | Ф31.8mm、Ф25.4mm | |
Usage environment | #-20℃~+45℃ | |
work system | S2 20% | |
Protective level | IP54 | |
Total weight | 22Kg | 26Kg |
Advantages of GYM200s
Dimensional drawing